Free surfboard SVG

Surfer with a surfboard SVG

Surfer with a surfboard, as a solid black shape
Surfer with a surfboard. The preview is the SVG file itself.

A surfer in board shorts standing on the sand with one hand on a striped shortboard that is taller than he is. A plain silhouette with no face, joined to the board and a strip of sand.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size71 × 100 mm (2.8 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length859 mm at this size
Narrowest part2.6 mm at this size
Nodes129 curve and line segments

Measured from the file. PNG: 1,442 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.71 × 1 in (18 × 25 mm)0.66 mm218 mm130Fine detail: vinyl and paper only, weed with care
1.42 × 2 in (36 × 51 mm)1.3 mm436 mm35Vinyl, card and thin sheet
2.13 × 3 in (54 × 76 mm)2 mm655 mm15Vinyl, card and thin sheet
2.84 × 4 in (72 × 102 mm)2.6 mm873 mm8Vinyl, card and thin sheet
4.26 × 6 in (108 × 152 mm)4 mm1,309 mm2Any material, including 3 mm wood and acrylic
5.68 × 8 in (144 × 203 mm)5.3 mm1,745 mm2Any material, including 3 mm wood and acrylic
8.52 × 12 in (216 × 305 mm)7.9 mm2,618 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More surfboard SVG files

← Surfboard name sign All 15 surfboards Surfer girl with a surfboard →