Free succulent SVG

Paper succulent template SVG

Paper succulent template, as a solid black shape
Paper succulent template. The preview is the SVG file itself.

Loose pieces: five stars of six leaves in shrinking sizes. Curl each leaf upwards, turn every layer half a step and glue them in a stack, largest at the bottom.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 99 mm (3.94 × 3.9 in), scales to any size
Pieces5 separate pieces
Outlines to cut5 outlines
Cut length704 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes172 curve and line segments

Measured from the file. PNG: 2,000 × 1,981 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.99 in (25 × 25 mm)Over 1.5 mm179 mm100Vinyl, card and thin sheet
2 × 1.98 in (51 × 50 mm)Over 3 mm358 mm25Any material, including 3 mm wood and acrylic
3 × 2.97 in (76 × 75 mm)Over 4.6 mm536 mm9Any material, including 3 mm wood and acrylic
4 × 3.96 in (102 × 101 mm)Over 6.1 mm715 mm4Any material, including 3 mm wood and acrylic
6 × 5.94 in (152 × 151 mm)Over 9.1 mm1,073 mm1Any material, including 3 mm wood and acrylic
8 × 7.92 in (203 × 201 mm)Over 12 mm1,431 mm1Any material, including 3 mm wood and acrylic
12 × 11.88 in (305 × 302 mm)Over 18 mm2,146 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More succulent SVG files

← Succulent outline All 14 succulents Layered succulent in four colours →