Free succulent SVG

Spiral succulent SVG

Spiral succulent, as a solid black shape — Spiral succulent. The preview is the SVG file itself.

Six rows of five leaves, each row turned a little further than the last, so the tips wind into five spiral arms like a spiral aloe.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 97 mm (3.94 × 3.83 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	21: 1 outer edge and 20 cut-outs
Cut length	1,741 mm at this size
Narrowest part	1.3 mm at this size
Nodes	229 curve and line segments
Symmetry	5-fold rotation

Measured from the file. PNG: 2,000 × 1,948 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.97 in (25 × 25 mm)	0.33 mm	442 mm	100	Too fine for most machines
2 × 1.95 in (51 × 49 mm)	0.66 mm	884 mm	25	Fine detail: vinyl and paper only, weed with care
3 × 2.92 in (76 × 74 mm)	0.99 mm	1,327 mm	9	Fine detail: vinyl and paper only, weed with care
4 × 3.89 in (102 × 99 mm)	1.3 mm	1,769 mm	4	Vinyl, card and thin sheet
6 × 5.84 in (152 × 148 mm)	2 mm	2,653 mm	2	Vinyl, card and thin sheet
8 × 7.78 in (203 × 198 mm)	2.6 mm	3,538 mm	1	Vinyl, card and thin sheet
12 × 11.68 in (305 × 297 mm)	4 mm	5,307 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More succulent SVG files

← Round leaf succulent All 14 succulents Agave succulent with pointed leaves →