Free succulent SVG

Agave succulent with pointed leaves SVG

Agave succulent with pointed leaves, as a solid black shape
Agave succulent with pointed leaves. The preview is the SVG file itself.

Three rows of seven sharp spear leaves, the shape of an agave or an aloe seen from above. Spikier than the rosettes and quick to weed.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.84 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut15: 1 outer edge and 14 cut-outs
Cut length847 mm at this size
Narrowest part3.1 mm at this size
Nodes213 curve and line segments
Symmetry7-fold rotation and mirror

Measured from the file. PNG: 2,000 × 1,952 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.79 mm215 mm100Fine detail: vinyl and paper only, weed with care
2 × 1.95 in (51 × 50 mm)1.6 mm430 mm25Vinyl, card and thin sheet
3 × 2.93 in (76 × 74 mm)2.4 mm645 mm9Vinyl, card and thin sheet
4 × 3.9 in (102 × 99 mm)3.1 mm861 mm4Any material, including 3 mm wood and acrylic
6 × 5.85 in (152 × 149 mm)4.7 mm1,291 mm2Any material, including 3 mm wood and acrylic
8 × 7.8 in (203 × 198 mm)6.3 mm1,721 mm1Any material, including 3 mm wood and acrylic
12 × 11.7 in (305 × 297 mm)9.4 mm2,582 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More succulent SVG files

← Spiral succulent All 14 succulents Simple succulent with fat leaves →