Free succulent SVG

Echeveria succulent rosette SVG

Echeveria succulent rosette, as a solid black shape
Echeveria succulent rosette. The preview is the SVG file itself.

The succulent everyone knows, seen from above: four rows of eight plump pointed leaves, each row tucked between the leaves of the row below. One piece, with a thin channel round every leaf tip.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 100 mm (3.94 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut25: 1 outer edge and 24 cut-outs
Cut length1,196 mm at this size
Narrowest part3.4 mm at this size
Nodes213 curve and line segments
Symmetry8-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 1 in (25 × 25 mm)0.86 mm304 mm100Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)1.7 mm608 mm25Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)2.6 mm911 mm9Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)3.5 mm1,215 mm4Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)5.2 mm1,823 mm1Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)6.9 mm2,430 mm1Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)10 mm3,645 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More succulent SVG files

← Layered succulent in four colours All 14 succulents Round leaf succulent →