Free snowflake SVG

Snowflake with a star centre SVG

Snowflake with a star centre. The preview is the SVG file itself.

A six-pointed star at the centre with a hexagon cut from it, and fine branched arms growing from the star’s points.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.43 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	2: 1 outer edge and 1 cut-out
Cut length	950 mm at this size
Narrowest part	3.1 mm at this size
Nodes	138 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,750 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.79 mm	241 mm	110	Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)	1.6 mm	483 mm	30	Vinyl, card and thin sheet
2.61 × 3 in (66 × 76 mm)	2.4 mm	724 mm	12	Vinyl, card and thin sheet
3.48 × 4 in (88 × 102 mm)	3.1 mm	965 mm	6	Any material, including 3 mm wood and acrylic
5.22 × 6 in (133 × 152 mm)	4.7 mm	1,448 mm	2	Any material, including 3 mm wood and acrylic
6.96 × 8 in (177 × 203 mm)	6.3 mm	1,930 mm	1	Any material, including 3 mm wood and acrylic
10.44 × 12 in (265 × 305 mm)	9.4 mm	2,896 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Forked snowflake All 24 snowflakes Lace snowflake with rings →