Free snowflake SVG

Snow star SVG

Snow star. The preview is the SVG file itself.

Half star, half snowflake: a bold six-pointed star with a slim branched arm running through each point and past it.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	598 mm at this size
Narrowest part	3.4 mm at this size
Nodes	96 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,742 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.86 mm	152 mm	110	Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)	1.7 mm	304 mm	30	Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)	2.6 mm	456 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	3.5 mm	608 mm	6	Any material, including 3 mm wood and acrylic
5.2 × 6 in (132 × 152 mm)	5.2 mm	911 mm	2	Any material, including 3 mm wood and acrylic
6.93 × 8 in (176 × 203 mm)	6.9 mm	1,215 mm	1	Any material, including 3 mm wood and acrylic
10.39 × 12 in (264 × 305 mm)	10 mm	1,823 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Snowflake outline All 24 snowflakes Classic six-arm snowflake →