Free snowflake SVG

Fern snowflake SVG

Fern snowflake, as a solid black shape — Fern snowflake. The preview is the SVG file itself.

Five pairs of fine pointed branches on each arm, longest near the middle, like a frost fern. Best cut at 80 mm or more so the branches keep their width.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,461 mm at this size
Narrowest part	2.8 mm at this size
Nodes	330 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,742 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.71 mm	371 mm	110	Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)	1.4 mm	742 mm	30	Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)	2.1 mm	1,113 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	2.8 mm	1,484 mm	6	Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)	4.3 mm	2,227 mm	2	Any material, including 3 mm wood and acrylic
6.93 × 8 in (176 × 203 mm)	5.7 mm	2,969 mm	1	Any material, including 3 mm wood and acrylic
10.39 × 12 in (264 × 305 mm)	8.5 mm	4,453 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Classic six-arm snowflake All 24 snowflakes Dendrite snowflake with twigs →