Free snowflake SVG

Arrow-tip snowflake SVG

Arrow-tip snowflake. The preview is the SVG file itself.

Each arm ends in an arrowhead made of two swept-back branches, with a second pair halfway down. Bold and quick to cut.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.43 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	1,089 mm at this size
Narrowest part	4.4 mm at this size
Nodes	108 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,754 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	1.1 mm	277 mm	110	Vinyl, card and thin sheet
1.74 × 2 in (44 × 51 mm)	2.2 mm	553 mm	30	Vinyl, card and thin sheet
2.62 × 3 in (66 × 76 mm)	3.4 mm	830 mm	12	Any material, including 3 mm wood and acrylic
3.49 × 4 in (89 × 102 mm)	4.5 mm	1,106 mm	6	Any material, including 3 mm wood and acrylic
5.23 × 6 in (133 × 152 mm)	6.7 mm	1,660 mm	2	Any material, including 3 mm wood and acrylic
6.98 × 8 in (177 × 203 mm)	8.9 mm	2,213 mm	1	Any material, including 3 mm wood and acrylic
10.46 × 12 in (266 × 305 mm)	13 mm	3,319 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Ball-tipped snowflake All 24 snowflakes Twelve-arm snowflake →