Free snowflake SVG

Diamond-chain snowflake SVG

Diamond-chain snowflake, as a solid black shape — Diamond-chain snowflake. The preview is the SVG file itself.

Diamonds threaded along each arm, large to small, ending in a point. Reads as jewellery rather than frost; good for cards and earrings.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.41 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	1 outline
Cut length	635 mm at this size
Narrowest part	2.6 mm at this size
Nodes	138 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,742 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.66 mm	161 mm	110	Fine detail: vinyl and paper only, weed with care
1.73 × 2 in (44 × 51 mm)	1.3 mm	323 mm	30	Vinyl, card and thin sheet
2.6 × 3 in (66 × 76 mm)	2 mm	484 mm	12	Vinyl, card and thin sheet
3.46 × 4 in (88 × 102 mm)	2.6 mm	645 mm	6	Vinyl, card and thin sheet
5.2 × 6 in (132 × 152 mm)	4 mm	968 mm	2	Any material, including 3 mm wood and acrylic
6.93 × 8 in (176 × 203 mm)	5.3 mm	1,290 mm	1	Any material, including 3 mm wood and acrylic
10.39 × 12 in (264 × 305 mm)	7.9 mm	1,935 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Twelve-arm snowflake All 24 snowflakes Feathered snowflake →