Free snowflake SVG

Snowflake in a hoop SVG

Snowflake in a hoop, as a solid black shape — Snowflake in a hoop. The preview is the SVG file itself.

A branched snowflake held inside a ring, so the tips cannot snag or snap. Made to hang: thread a ribbon through any gap.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 100 mm (3.94 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	1,577 mm at this size
Narrowest part	3.9 mm at this size
Nodes	140 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 2,000 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 1 in (25 × 25 mm)	0.99 mm	401 mm	100	Fine detail: vinyl and paper only, weed with care
2 × 2 in (51 × 51 mm)	2 mm	801 mm	25	Vinyl, card and thin sheet
3 × 3 in (76 × 76 mm)	3 mm	1,202 mm	9	Vinyl, card and thin sheet
4 × 4 in (102 × 102 mm)	4 mm	1,602 mm	4	Any material, including 3 mm wood and acrylic
6 × 6 in (152 × 152 mm)	5.9 mm	2,403 mm	1	Any material, including 3 mm wood and acrylic
8 × 8 in (203 × 203 mm)	7.9 mm	3,204 mm	1	Any material, including 3 mm wood and acrylic
12 × 12 in (305 × 305 mm)	12 mm	4,807 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Sectored plate snowflake with arms All 24 snowflakes Forked snowflake →