Free snowflake SVG

Classic six-arm snowflake SVG

Classic six-arm snowflake, as a solid black shape — Classic six-arm snowflake. The preview is the SVG file itself.

Three pairs of branches on each arm and a small hexagon at the centre, all with round ends. The parts are thick enough to cut small in vinyl or card.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	87 × 100 mm (3.43 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	1,266 mm at this size
Narrowest part	3.7 mm at this size
Nodes	166 curve and line segments
Symmetry	6-fold rotation and mirror

Measured from the file. PNG: 1,754 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.87 × 1 in (22 × 25 mm)	0.94 mm	322 mm	110	Fine detail: vinyl and paper only, weed with care
1.74 × 2 in (44 × 51 mm)	1.9 mm	643 mm	30	Vinyl, card and thin sheet
2.62 × 3 in (66 × 76 mm)	2.8 mm	965 mm	12	Vinyl, card and thin sheet
3.49 × 4 in (89 × 102 mm)	3.8 mm	1,286 mm	6	Any material, including 3 mm wood and acrylic
5.23 × 6 in (133 × 152 mm)	5.6 mm	1,929 mm	2	Any material, including 3 mm wood and acrylic
6.98 × 8 in (177 × 203 mm)	7.5 mm	2,573 mm	1	Any material, including 3 mm wood and acrylic
10.46 × 12 in (266 × 305 mm)	11 mm	3,859 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More snowflake SVG files

← Snow star All 24 snowflakes Fern snowflake →