Free sloth SVG

Simple sitting sloth SVG

Simple sitting sloth, as a solid black shape — Simple sitting sloth. The preview is the SVG file itself.

A sloth sitting upright with its arms by its sides and three claws on each hand and foot. Few cuts and thick limbs, so it is the easiest sloth here to cut.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	71 × 100 mm (2.78 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	710 mm at this size
Narrowest part	2.4 mm at this size
Nodes	299 curve and line segments

Measured from the file. PNG: 1,433 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.71 × 1 in (18 × 25 mm)	0.61 mm	180 mm	130	Fine detail: vinyl and paper only, weed with care
1.41 × 2 in (36 × 51 mm)	1.2 mm	361 mm	35	Vinyl, card and thin sheet
2.11 × 3 in (54 × 76 mm)	1.8 mm	541 mm	15	Vinyl, card and thin sheet
2.82 × 4 in (72 × 102 mm)	2.4 mm	721 mm	8	Vinyl, card and thin sheet
4.23 × 6 in (107 × 152 mm)	3.7 mm	1,082 mm	2	Any material, including 3 mm wood and acrylic
5.64 × 8 in (143 × 203 mm)	4.9 mm	1,443 mm	2	Any material, including 3 mm wood and acrylic
8.46 × 12 in (215 × 305 mm)	7.3 mm	2,164 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sloth SVG files

← Sloth silhouette All 14 sloths Baby sloth clinging to a branch →