Free sloth SVG

Christmas sloth in a Santa hat SVG

Christmas sloth in a Santa hat, as a solid black shape — Christmas sloth in a Santa hat. The preview is the SVG file itself.

A sitting sloth wearing a Santa hat that flops to one side, with a bobble on the end. Cut it from one colour, or lay a red hat and a white band on top.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	59 × 100 mm (2.32 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	7: 1 outer edge and 6 cut-outs
Cut length	739 mm at this size
Narrowest part	1.9 mm at this size
Nodes	330 curve and line segments

Measured from the file. PNG: 1,210 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.59 × 1 in (15 × 25 mm)	0.48 mm	188 mm	150	Too fine for most machines
1.18 × 2 in (30 × 51 mm)	0.97 mm	375 mm	40	Fine detail: vinyl and paper only, weed with care
1.77 × 3 in (45 × 76 mm)	1.4 mm	563 mm	18	Vinyl, card and thin sheet
2.36 × 4 in (60 × 102 mm)	1.9 mm	751 mm	8	Vinyl, card and thin sheet
3.53 × 6 in (90 × 152 mm)	2.9 mm	1,126 mm	3	Vinyl, card and thin sheet
4.71 × 8 in (120 × 203 mm)	3.9 mm	1,502 mm	2	Any material, including 3 mm wood and acrylic
7.07 × 12 in (180 × 305 mm)	5.8 mm	2,252 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sloth SVG files

← Yoga sloth All 14 sloths Sloth mandala →