Free sloth SVG

Sloth face outline SVG

Sloth face outline, drawn as a line — Sloth face outline. The preview is the SVG file itself.

The sloth face as a line drawing: the head, the edge of the pale face, and the eye stripes, nose and smile left solid. All joined, so it cuts as one piece as well as plotting.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	98 × 100 mm (3.87 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	1,204 mm at this size
Narrowest part	3.5 mm at this size
Nodes	286 curve and line segments

Measured from the file. PNG: 1,965 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.98 × 1 in (25 × 25 mm)	0.89 mm	306 mm	100	Fine detail: vinyl and paper only, weed with care
1.96 × 2 in (50 × 51 mm)	1.8 mm	612 mm	25	Vinyl, card and thin sheet
2.95 × 3 in (75 × 76 mm)	2.7 mm	917 mm	9	Vinyl, card and thin sheet
3.93 × 4 in (100 × 102 mm)	3.6 mm	1,223 mm	4	Any material, including 3 mm wood and acrylic
5.89 × 6 in (150 × 152 mm)	5.3 mm	1,835 mm	2	Any material, including 3 mm wood and acrylic
7.86 × 8 in (200 × 203 mm)	7.1 mm	2,447 mm	1	Any material, including 3 mm wood and acrylic
11.78 × 12 in (299 × 305 mm)	11 mm	3,670 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sloth SVG files

← Sloth mandala All 14 sloths Hanging sloth outline →