Free sloth SVG

Baby sloth clinging to a branch SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Baby sloth clinging to a branch, as a solid black shape
Baby sloth clinging to a branch. The preview is the SVG file itself.

A young sloth holding on to an upright branch with an arm and a leg wrapped round it, looking over its shoulder at you. Tall and narrow, for bookmarks and door edges.

What is in the file

Size48 × 100 mm (1.91 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length574 mm at this size
Narrowest part1 mm at this size
Nodes268 curve and line segments

Measured from the file. PNG: 1,008 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.48 × 1 in (12 × 25 mm)0.25 mm146 mm170Too fine for most machines
0.97 × 2 in (25 × 51 mm)0.51 mm292 mm50Fine detail: vinyl and paper only, weed with care
1.45 × 3 in (37 × 76 mm)0.76 mm437 mm21Fine detail: vinyl and paper only, weed with care
1.94 × 4 in (49 × 102 mm)1 mm583 mm10Vinyl, card and thin sheet
2.9 × 6 in (74 × 152 mm)1.5 mm875 mm3Vinyl, card and thin sheet
3.87 × 8 in (98 × 203 mm)2 mm1,166 mm2Vinyl, card and thin sheet
5.81 × 12 in (148 × 305 mm)3 mm1,750 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More sloth SVG files

← Simple sitting sloth All 14 sloths Cute waving sloth with a flower →