Free skull SVG

Skull and crossbones SVG

Skull and crossbones, as a solid black shape
Skull and crossbones. The preview is the SVG file itself.

The skull in front of two long crossed bones, in the old poison-label arrangement. Skull and bones weld into one piece.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 93 mm (3.94 × 3.64 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length792 mm at this size
Narrowest part4.1 mm at this size
Nodes185 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 23 mm)1 mm201 mm100Vinyl, card and thin sheet
2 × 1.85 in (51 × 47 mm)2.1 mm402 mm25Vinyl, card and thin sheet
3 × 2.77 in (76 × 70 mm)3.1 mm604 mm12Any material, including 3 mm wood and acrylic
4 × 3.7 in (102 × 94 mm)4.2 mm805 mm6Any material, including 3 mm wood and acrylic
6 × 5.55 in (152 × 141 mm)6.2 mm1,207 mm2Any material, including 3 mm wood and acrylic
8 × 7.4 in (203 × 188 mm)8.3 mm1,609 mm1Any material, including 3 mm wood and acrylic
12 × 11.1 in (305 × 282 mm)12 mm2,414 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skull SVG files

← Simple skull with round eyes All 16 skulls Skull above two crossed bones →