Screaming skull with an open jaw SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A scowling skull with its jaw dropped wide: slanted sockets, hollow cheeks, a crack down the forehead and a dark mouth with a row of teeth above and below. The one for a haunted house door.
What is in the file
| Size | 68 × 100 mm (2.66 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 784 mm at this size |
| Narrowest part | 2.4 mm at this size |
| Nodes | 145 curve and line segments |
| Also found as | Halloween skull SVG |
Measured from the file. PNG: 1,377 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.68 × 1 in (17 × 25 mm) | 0.61 mm | 199 mm | 130 | Fine detail: vinyl and paper only, weed with care |
| 1.35 × 2 in (34 × 51 mm) | 1.2 mm | 398 mm | 35 | Vinyl, card and thin sheet |
| 2.03 × 3 in (52 × 76 mm) | 1.8 mm | 597 mm | 15 | Vinyl, card and thin sheet |
| 2.7 × 4 in (69 × 102 mm) | 2.4 mm | 797 mm | 8 | Vinyl, card and thin sheet |
| 4.06 × 6 in (103 × 152 mm) | 3.7 mm | 1,195 mm | 2 | Any material, including 3 mm wood and acrylic |
| 5.41 × 8 in (137 × 203 mm) | 4.9 mm | 1,593 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8.11 × 12 in (206 × 305 mm) | 7.3 mm | 2,390 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More skull SVG files
-
Skull outline Outline · 5 pieces
-
Three skulls in a row Solid · one piece
-
Skull with a mandala forehead Solid · one piece
-
Bull skull with upswept horns Solid · one piece
-
Skull silhouette from the side Solid · one piece
-
Classic skull with a jaw Solid · one piece
-
Simple skull with round eyes Solid · one piece
-
Skull and crossbones Solid · one piece