Free skull SVG

Classic skull with a jaw SVG

Classic skull with a jaw, as a solid black shape
Classic skull with a jaw. The preview is the SVG file itself.

A skull from the front: a round cranium, cheekbones, a lower jaw, drooping eye sockets, a heart-shaped nose and a row of six teeth. Symmetrical, with four holes to weed.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size82 × 100 mm (3.21 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut5: 1 outer edge and 4 cut-outs
Cut length718 mm at this size
Narrowest part5.8 mm at this size
Nodes113 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,646 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.82 × 1 in (21 × 25 mm)1.5 mm182 mm120Vinyl, card and thin sheet
1.63 × 2 in (41 × 51 mm)2.9 mm365 mm30Vinyl, card and thin sheet
2.45 × 3 in (62 × 76 mm)4.4 mm547 mm12Any material, including 3 mm wood and acrylic
3.26 × 4 in (83 × 102 mm)5.9 mm729 mm6Any material, including 3 mm wood and acrylic
4.9 × 6 in (124 × 152 mm)8.8 mm1,094 mm2Any material, including 3 mm wood and acrylic
6.53 × 8 in (166 × 203 mm)12 mm1,459 mm1Any material, including 3 mm wood and acrylic
9.79 × 12 in (249 × 305 mm)18 mm2,188 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skull SVG files

← Skull silhouette from the side All 16 skulls Simple skull with round eyes →