Free skull SVG

Pirate skull with a bandana SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pirate skull with a bandana, as a solid black shape
Pirate skull with a bandana. The preview is the SVG file itself.

A skull in a spotted bandana knotted at one side, with a patch over one eye, in front of crossed bones. A thin cut line parts the bandana from the skull.

What is in the file

Size100 × 93 mm (3.94 × 3.64 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut12: 1 outer edge and 11 cut-outs
Cut length1,039 mm at this size
Narrowest part1 mm at this size
Nodes248 curve and line segments
Also found asPirate skull and crossbones SVG

Measured from the file. PNG: 2,000 × 1,856 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.93 in (25 × 23 mm)0.25 mm264 mm100Too fine for most machines
2 × 1.85 in (51 × 47 mm)0.51 mm528 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.77 in (76 × 70 mm)0.76 mm792 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.7 in (102 × 94 mm)1 mm1,056 mm6Vinyl, card and thin sheet
6 × 5.55 in (152 × 141 mm)1.5 mm1,583 mm2Vinyl, card and thin sheet
8 × 7.4 in (203 × 188 mm)2 mm2,111 mm1Vinyl, card and thin sheet
12 × 11.1 in (305 × 282 mm)3 mm3,167 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skull SVG files

← Skull above two crossed bones All 16 skulls Sugar skull →