Free skull SVG

Sugar skull with a flower crown SVG

Sugar skull with a flower crown, as a solid black shape
Sugar skull with a flower crown. The preview is the SVG file itself.

A sugar skull wearing three large flowers across its brow, with a leaf at each end, heart eyes ringed with dots and a stitched smile.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 98 mm (3.94 × 3.87 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut53: 1 outer edge and 52 cut-outs
Cut length1,462 mm at this size
Narrowest part1.8 mm at this size
Nodes392 curve and line segments
SymmetryMirror

Measured from the file. PNG: 2,000 × 1,965 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.98 in (25 × 25 mm)0.46 mm371 mm100Too fine for most machines
2 × 1.96 in (51 × 50 mm)0.91 mm743 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.95 in (76 × 75 mm)1.4 mm1,114 mm9Vinyl, card and thin sheet
4 × 3.93 in (102 × 100 mm)1.8 mm1,485 mm4Vinyl, card and thin sheet
6 × 5.89 in (152 × 150 mm)2.7 mm2,228 mm2Vinyl, card and thin sheet
8 × 7.86 in (203 × 200 mm)3.7 mm2,971 mm1Any material, including 3 mm wood and acrylic
12 × 11.78 in (305 × 299 mm)5.5 mm4,456 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More skull SVG files

← Simple sugar skull with a flower All 16 skulls Skull with a bow →