Free Shine SVG

Shine stencil plate SVG

Shine stencil plate, as a solid black shape — Shine stencil plate. The preview is the SVG file itself.

A rounded plate with “SHINE” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 45 mm (3.94 × 1.77 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	6: 1 outer edge and 5 cut-outs
Cut length	847 mm at this size
Narrowest part	3.1 mm at this size
Nodes	73 curve and line segments

Measured from the file. PNG: 2,000 × 940 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.45 in (25 × 11 mm)	0.79 mm	215 mm	180	Fine detail: vinyl and paper only, weed with care
2 × 0.9 in (51 × 23 mm)	1.6 mm	430 mm	55	Vinyl, card and thin sheet
3 × 1.35 in (76 × 34 mm)	2.4 mm	645 mm	21	Vinyl, card and thin sheet
4 × 1.8 in (102 × 46 mm)	3.1 mm	861 mm	12	Any material, including 3 mm wood and acrylic
6 × 2.69 in (152 × 68 mm)	4.7 mm	1,291 mm	4	Any material, including 3 mm wood and acrylic
8 × 3.59 in (203 × 91 mm)	6.3 mm	1,721 mm	3	Any material, including 3 mm wood and acrylic
12 × 5.39 in (305 × 137 mm)	9.4 mm	2,582 mm	2	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Shine SVG files

← Shine outline lettering All 12 Shine designs Shine with a drop shadow →