Shine in Lilita One SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Shine” set in Lilita One, a chunky rounded sans. The strokes are thick and the corners soft, so it is the easiest version to cut small.
What is in the file
| Size | 100 × 31 mm (3.94 × 1.24 in), scales to any size |
|---|---|
| Pieces | 6 separate pieces |
| Outlines to cut | 7: 6 outer edges and 1 cut-out |
| Cut length | 541 mm at this size |
| Narrowest part | 4.8 mm at this size |
| Nodes | 128 curve and line segments |
Measured from the file. PNG: 2,000 × 681 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.31 in (25 × 8 mm) | 1.2 mm | 137 mm | 230 | Vinyl, card and thin sheet |
| 2 × 0.63 in (51 × 16 mm) | 2.4 mm | 275 mm | 70 | Vinyl, card and thin sheet |
| 3 × 0.94 in (76 × 24 mm) | 3.7 mm | 412 mm | 30 | Any material, including 3 mm wood and acrylic |
| 4 × 1.26 in (102 × 32 mm) | 4.9 mm | 550 mm | 16 | Any material, including 3 mm wood and acrylic |
| 6 × 1.88 in (152 × 48 mm) | 7.3 mm | 824 mm | 5 | Any material, including 3 mm wood and acrylic |
| 8 × 2.51 in (203 × 64 mm) | 9.8 mm | 1,099 mm | 4 | Any material, including 3 mm wood and acrylic |
| 12 × 3.77 in (305 × 96 mm) | 15 mm | 1,649 mm | 3 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Shine SVG files
-
Shine in Alfa Slab One Solid · 6 pieces
-
Shine in Amatic SC Solid · 5 pieces
-
Shine in block capitals Solid · 5 pieces
-
Shine with a swash underline Solid · 3 pieces
-
Shine with stars Solid · 9 pieces
-
Shine outline lettering Outline · 7 pieces
-
Shine stencil plate Solid · one piece
-
Shine with a drop shadow Layered · 5 pieces
← Shine in Kaushan Script All 13 Shine designs Shine in Alfa Slab One →