Free Shine SVG

Shine with a swash underline SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Shine with a swash underline, as a solid black shape
Shine with a swash underline. The preview is the SVG file itself.

“Shine” in Pacifico script with a tapering swash swept underneath it, welded to the word where a letter dips down to meet it, or sitting just below it where none does.

What is in the file

Size100 × 48 mm (3.94 × 1.9 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length821 mm at this size
Narrowest part0.9 mm at this size
Nodes211 curve and line segments

Measured from the file. PNG: 2,000 × 1,006 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.48 in (25 × 12 mm)0.23 mm209 mm170Too fine for most machines
2 × 0.97 in (51 × 25 mm)0.46 mm417 mm50Too fine for most machines
3 × 1.45 in (76 × 37 mm)0.69 mm626 mm21Fine detail: vinyl and paper only, weed with care
4 × 1.93 in (102 × 49 mm)0.91 mm834 mm10Fine detail: vinyl and paper only, weed with care
6 × 2.9 in (152 × 74 mm)1.4 mm1,251 mm3Vinyl, card and thin sheet
8 × 3.86 in (203 × 98 mm)1.8 mm1,668 mm3Vinyl, card and thin sheet
12 × 5.8 in (305 × 147 mm)2.7 mm2,502 mm2Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Shine SVG files

← Shine in block capitals All 13 Shine designs Shine with stars →