Shine with a drop shadow SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
“Shine” in Pacifico script in two colours: the words, and a thicker copy behind them shifted down and to the right as a shadow. The shadow layer is one solid piece, which makes the whole design easy to place.
What is in the file
| Size | 100 × 41 mm (3.94 × 1.61 in), scales to any size |
|---|---|
| Pieces | 5 separate pieces |
| Outlines to cut | 9: 5 outer edges and 4 cut-outs |
| Cut length | 1,193 mm at this size |
| Narrowest part | 2.6 mm at this size |
| Nodes | 280 curve and line segments |
| Layers | 2: shadow and words |
Measured from the file. PNG: 2,000 × 865 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.41 in (25 × 10 mm) | 0.66 mm | 303 mm | 200 | Fine detail: vinyl and paper only, weed with care |
| 2 × 0.82 in (51 × 21 mm) | 1.3 mm | 606 mm | 55 | Vinyl, card and thin sheet |
| 3 × 1.23 in (76 × 31 mm) | 2 mm | 909 mm | 24 | Vinyl, card and thin sheet |
| 4 × 1.64 in (102 × 42 mm) | 2.6 mm | 1,212 mm | 12 | Vinyl, card and thin sheet |
| 6 × 2.46 in (152 × 62 mm) | 4 mm | 1,818 mm | 4 | Any material, including 3 mm wood and acrylic |
| 8 × 3.28 in (203 × 83 mm) | 5.3 mm | 2,424 mm | 3 | Any material, including 3 mm wood and acrylic |
| 12 × 4.92 in (305 × 125 mm) | 7.9 mm | 3,636 mm | 2 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Shine SVG files
-
Shine with a sun Solid · 4 pieces
-
Shine in Pacifico Solid · 3 pieces
-
Shine in Lobster Solid · 3 pieces
-
Shine in Kaushan Script Solid · 6 pieces
-
Shine in Lilita One Solid · 6 pieces
-
Shine in Alfa Slab One Solid · 6 pieces
-
Shine in Amatic SC Solid · 5 pieces
-
Shine in block capitals Solid · 5 pieces
← Shine stencil plate All 13 Shine designs Shine with a sun →