Free Shine SVG

Shine in Alfa Slab One SVG

Shine in Alfa Slab One, as a solid black shape — Shine in Alfa Slab One. The preview is the SVG file itself.

“Shine” set in Alfa Slab One, a very heavy slab serif. Thick strokes and blunt square serifs give it the weight of a poster headline.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 27 mm (3.94 × 1.06 in), scales to any size
Pieces	6 separate pieces
Outlines to cut	7: 6 outer edges and 1 cut-out
Cut length	555 mm at this size
Narrowest part	3.4 mm at this size
Nodes	199 curve and line segments

Measured from the file. PNG: 2,000 × 596 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.27 in (25 × 7 mm)	0.86 mm	141 mm	250	Fine detail: vinyl and paper only, weed with care
2 × 0.54 in (51 × 14 mm)	1.7 mm	282 mm	80	Vinyl, card and thin sheet
3 × 0.81 in (76 × 21 mm)	2.6 mm	423 mm	36	Vinyl, card and thin sheet
4 × 1.08 in (102 × 27 mm)	3.5 mm	564 mm	18	Any material, including 3 mm wood and acrylic
6 × 1.62 in (152 × 41 mm)	5.2 mm	846 mm	6	Any material, including 3 mm wood and acrylic
8 × 2.16 in (203 × 55 mm)	6.9 mm	1,128 mm	5	Any material, including 3 mm wood and acrylic
12 × 3.24 in (305 × 82 mm)	10 mm	1,692 mm	3	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Shine SVG files

← Shine in Lilita One All 12 Shine designs Shine in Amatic SC →