Free Shine SVG

Shine in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Shine in Pacifico, as a solid black shape
Shine in Pacifico. The preview is the SVG file itself.

“Shine” set in Pacifico, a bold brush script. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 39 mm (3.94 × 1.55 in), scales to any size
Pieces3 separate pieces
Outlines to cut5: 3 outer edges and 2 cut-outs
Cut length645 mm at this size
Narrowest part3 mm at this size
Nodes157 curve and line segments

Measured from the file. PNG: 2,000 × 833 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.39 in (25 × 10 mm)0.76 mm164 mm200Fine detail: vinyl and paper only, weed with care
2 × 0.79 in (51 × 20 mm)1.5 mm328 mm60Vinyl, card and thin sheet
3 × 1.18 in (76 × 30 mm)2.3 mm491 mm24Vinyl, card and thin sheet
4 × 1.57 in (102 × 40 mm)3 mm655 mm12Any material, including 3 mm wood and acrylic
6 × 2.36 in (152 × 60 mm)4.6 mm983 mm4Any material, including 3 mm wood and acrylic
8 × 3.14 in (203 × 80 mm)6.1 mm1,311 mm3Any material, including 3 mm wood and acrylic
12 × 4.72 in (305 × 120 mm)9.1 mm1,966 mm2Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Shine SVG files

← Shine with a sun All 13 Shine designs Shine in Lobster →