Free shamrock SVG

Shamrock outline SVG

Shamrock outline, drawn as a line
Shamrock outline. The preview is the SVG file itself.

The outer edge of the three-leaf shamrock and its stem as one line about 2.5 mm wide. For colouring pages, foil, engraving, or as a border over a solid shamrock in another colour.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size95 × 100 mm (3.74 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut2: 1 outer edge and 1 cut-out
Cut length1,087 mm at this size
Narrowest part2.3 mm at this size
Nodes155 curve and line segments

Measured from the file. PNG: 1,902 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.95 × 1 in (24 × 25 mm)0.58 mm276 mm100Fine detail: vinyl and paper only, weed with care
1.9 × 2 in (48 × 51 mm)1.2 mm552 mm25Vinyl, card and thin sheet
2.85 × 3 in (72 × 76 mm)1.8 mm828 mm12Vinyl, card and thin sheet
3.8 × 4 in (96 × 102 mm)2.3 mm1,104 mm6Vinyl, card and thin sheet
5.69 × 6 in (145 × 152 mm)3.5 mm1,657 mm2Any material, including 3 mm wood and acrylic
7.59 × 8 in (193 × 203 mm)4.7 mm2,209 mm1Any material, including 3 mm wood and acrylic
11.39 × 12 in (289 × 305 mm)7 mm3,313 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shamrock SVG files

← Four-leaf clover with a curved stem All 16 shamrocks Four-leaf clover outline →