Free shamrock SVG

Shamrock border SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Shamrock border, as a solid black shape
Shamrock border. The preview is the SVG file itself.

Five small shamrocks standing on a straight line, tall and short by turns. Repeat it end to end for a border on a card, a banner or a table runner.

What is in the file

Size100 × 25 mm (3.94 × 0.98 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length660 mm at this size
Narrowest part2.2 mm at this size
Nodes142 curve and line segments

Measured from the file. PNG: 2,000 × 554 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.25 in (25 × 6 mm)0.56 mm168 mm270Fine detail: vinyl and paper only, weed with care
2 × 0.5 in (51 × 13 mm)1.1 mm335 mm85Vinyl, card and thin sheet
3 × 0.74 in (76 × 19 mm)1.7 mm503 mm36Vinyl, card and thin sheet
4 × 0.99 in (102 × 25 mm)2.2 mm671 mm20Vinyl, card and thin sheet
6 × 1.49 in (152 × 38 mm)3.4 mm1,006 mm7Any material, including 3 mm wood and acrylic
8 × 1.98 in (203 × 50 mm)4.5 mm1,341 mm5Any material, including 3 mm wood and acrylic
12 × 2.98 in (305 × 76 mm)6.7 mm2,012 mm3Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shamrock SVG files

← Shamrock mandala All 16 shamrocks Shamrock pattern with one four-leaf clover →