Free shamrock SVG

Four-leaf clover SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Four-leaf clover, as a solid black shape
Four-leaf clover. The preview is the SVG file itself.

Four heart leaves set like an X on a straight stem, with a narrow gap between each pair so every leaf reads on its own. The lucky one.

What is in the file

Size86 × 100 mm (3.39 × 3.94 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut1 outline
Cut length572 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes62 curve and line segments
SymmetryMirror

Measured from the file. PNG: 1,735 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.86 × 1 in (22 × 25 mm)Over 1.5 mm145 mm110Vinyl, card and thin sheet
1.72 × 2 in (44 × 51 mm)Over 3 mm291 mm30Any material, including 3 mm wood and acrylic
2.59 × 3 in (66 × 76 mm)Over 4.6 mm436 mm12Any material, including 3 mm wood and acrylic
3.45 × 4 in (88 × 102 mm)Over 6.1 mm581 mm6Any material, including 3 mm wood and acrylic
5.17 × 6 in (131 × 152 mm)Over 9.1 mm872 mm2Any material, including 3 mm wood and acrylic
6.9 × 8 in (175 × 203 mm)Over 12 mm1,162 mm1Any material, including 3 mm wood and acrylic
10.34 × 12 in (263 × 305 mm)Over 18 mm1,743 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shamrock SVG files

← Geometric shamrock All 16 shamrocks Four-leaf clover with a curved stem →