Free shamrock SVG

Four-leaf clover with a curved stem SVG

Four-leaf clover with a curved stem, as a solid black shape — Four-leaf clover with a curved stem. The preview is the SVG file itself.

Four veined leaves set like a plus sign, with the stem curving out between two of them. A livelier, hand-picked look than the upright clover.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	88 × 100 mm (3.45 × 3.94 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	5: 1 outer edge and 4 cut-outs
Cut length	763 mm at this size
Narrowest part	3.4 mm at this size
Nodes	79 curve and line segments

Measured from the file. PNG: 1,762 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.88 × 1 in (22 × 25 mm)	0.86 mm	194 mm	110	Fine detail: vinyl and paper only, weed with care
1.75 × 2 in (45 × 51 mm)	1.7 mm	388 mm	30	Vinyl, card and thin sheet
2.63 × 3 in (67 × 76 mm)	2.6 mm	581 mm	12	Vinyl, card and thin sheet
3.5 × 4 in (89 × 102 mm)	3.5 mm	775 mm	6	Any material, including 3 mm wood and acrylic
5.26 × 6 in (134 × 152 mm)	5.2 mm	1,163 mm	2	Any material, including 3 mm wood and acrylic
7.01 × 8 in (178 × 203 mm)	6.9 mm	1,550 mm	1	Any material, including 3 mm wood and acrylic
10.51 × 12 in (267 × 305 mm)	10 mm	2,326 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shamrock SVG files

← Four-leaf clover All 16 shamrocks Shamrock outline →