Free shamrock SVG

Split shamrock for a name SVG

Split shamrock for a name, as a solid black shape — Split shamrock for a name. The preview is the SVG file itself.

A shamrock cut across just below its centre and pulled apart, each half finished with a straight rule along the cut. Type a family name into the gap. Two separate pieces.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	84 × 100 mm (3.29 × 3.94 in), scales to any size
Pieces	2 separate pieces
Outlines to cut	4: 2 outer edges and 2 cut-outs
Cut length	642 mm at this size
Narrowest part	1.8 mm at this size
Nodes	63 curve and line segments
Symmetry	Mirror

Measured from the file. PNG: 1,683 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.84 × 1 in (21 × 25 mm)	0.46 mm	163 mm	110	Too fine for most machines
1.67 × 2 in (42 × 51 mm)	0.91 mm	326 mm	30	Fine detail: vinyl and paper only, weed with care
2.51 × 3 in (64 × 76 mm)	1.4 mm	489 mm	12	Vinyl, card and thin sheet
3.34 × 4 in (85 × 102 mm)	1.8 mm	652 mm	6	Vinyl, card and thin sheet
5.01 × 6 in (127 × 152 mm)	2.7 mm	978 mm	2	Vinyl, card and thin sheet
6.68 × 8 in (170 × 203 mm)	3.7 mm	1,305 mm	1	Any material, including 3 mm wood and acrylic
10.02 × 12 in (255 × 305 mm)	5.5 mm	1,957 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More shamrock SVG files

← Shamrock monogram frame All 16 shamrocks Shamrock mandala →