Pug outline SVG
The standing pug as one even line about 2 mm wide in a closed loop, with the curl of the tail drawn as a round bump on the back. For colouring pages, foil and pen plotters.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 83 mm (3.94 × 3.26 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 2: 1 outer edge and 1 cut-out |
| Cut length | 826 mm at this size |
| Narrowest part | 2.1 mm at this size |
| Nodes | 271 curve and line segments |
Measured from the file. PNG: 2,000 × 1,669 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.83 in (25 × 21 mm) | 0.53 mm | 210 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.66 in (51 × 42 mm) | 1.1 mm | 420 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.48 in (76 × 63 mm) | 1.6 mm | 629 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.31 in (102 × 84 mm) | 2.1 mm | 839 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.97 in (152 × 126 mm) | 3.2 mm | 1,259 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 6.62 in (203 × 168 mm) | 4.3 mm | 1,678 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 9.94 in (305 × 252 mm) | 6.4 mm | 2,518 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Pug in a heart 
Christmas pug in a Santa hat 
Pug paw print 
Pug monogram frame 
Pug mum and pup 
Layered fawn pug face in three colours 
Pug standing 
Pug face 