Pug in a heart SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pug standing inside a heart with its feet on the outline where the heart narrows and its curly tail up in one lobe. One welded piece for cards, gifts and memorials.
What is in the file
| Size | 100 × 89 mm (3.94 × 3.51 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 8: 1 outer edge and 7 cut-outs |
| Cut length | 968 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 313 curve and line segments |
Measured from the file. PNG: 2,000 × 1,790 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.89 in (25 × 23 mm) | 0.36 mm | 246 mm | 110 | Too fine for most machines |
| 2 × 1.78 in (51 × 45 mm) | 0.71 mm | 492 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.67 in (76 × 68 mm) | 1.1 mm | 738 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.56 in (102 × 91 mm) | 1.4 mm | 983 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.35 in (152 × 136 mm) | 2.1 mm | 1,475 mm | 2 | Vinyl, card and thin sheet |
| 8 × 7.13 in (203 × 181 mm) | 2.8 mm | 1,967 mm | 1 | Vinyl, card and thin sheet |
| 12 × 10.69 in (305 × 272 mm) | 4.3 mm | 2,950 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.