Free pug SVG

Layered fawn pug face in three colours SVG

Layered fawn pug face in three colours, in layered colours
Layered fawn pug face in three colours. The preview is the SVG file itself.

Three layers to stack: a fawn head, the black ears, mask, eyes and brow wrinkles, and a pink tongue on top. The catch-lights in the eyes are small holes in the black layer.

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size100 × 75 mm (3.94 × 2.93 in), scales to any size
Pieces10 separate pieces
Outlines to cut14: 10 outer edges and 4 cut-outs
Cut length1,066 mm at this size
Narrowest partNothing narrower than 6 mm at this size
Nodes254 curve and line segments
Layers3: head, mask, ears and wrinkles and tongue

Measured from the file. PNG: 2,000 × 1,510 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.75 in (25 × 19 mm)Over 1.5 mm271 mm120Vinyl, card and thin sheet
2 × 1.49 in (51 × 38 mm)Over 3 mm542 mm35Any material, including 3 mm wood and acrylic
3 × 2.24 in (76 × 57 mm)Over 4.6 mm812 mm15Any material, including 3 mm wood and acrylic
4 × 2.98 in (102 × 76 mm)Over 6.1 mm1,083 mm6Any material, including 3 mm wood and acrylic
6 × 4.47 in (152 × 114 mm)Over 9.1 mm1,625 mm2Any material, including 3 mm wood and acrylic
8 × 5.96 in (203 × 151 mm)Over 12 mm2,166 mm1Any material, including 3 mm wood and acrylic
12 × 8.94 in (305 × 227 mm)Over 18 mm3,249 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pug SVG files

← Pug mum and pup All 13 pugs Pug standing →