Pug standing SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A pug in side view: a round head with a flat face, a small folded ear, a square cobby body on straight legs and the tail curled into a ring over the hip. Slits mark the eye, ear, nose fold, shoulder and thigh.
What is in the file
| Size | 100 × 83 mm (3.94 × 3.26 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 7: 1 outer edge and 6 cut-outs |
| Cut length | 701 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 261 curve and line segments |
| Also found as | Pug dog SVG |
Measured from the file. PNG: 2,000 × 1,669 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.83 in (25 × 21 mm) | 0.25 mm | 178 mm | 110 | Too fine for most machines |
| 2 × 1.66 in (51 × 42 mm) | 0.51 mm | 356 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.48 in (76 × 63 mm) | 0.76 mm | 534 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 4 × 3.31 in (102 × 84 mm) | 1 mm | 712 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.97 in (152 × 126 mm) | 1.5 mm | 1,068 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.62 in (203 × 168 mm) | 2 mm | 1,424 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.94 in (305 × 252 mm) | 3 mm | 2,137 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.