Free pop up card SVG

Pop up box card SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pop up box card, as a solid black shape
Pop up box card. The preview is the SVG file itself.

The card in a box: a strip of four panels that glues into a square tube and squashes flat for the envelope, three flaps that fold down, two cross strips to glue inside and three toppers on stalks to stand on them. Cut the file 275 mm wide for a box 64 mm square and 90 mm tall.

What is in the file

Size100 × 90 mm (3.94 × 3.52 in), scales to any size
Pieces6 separate pieces
Outlines to cut46: 6 outer edges and 40 cut-outs
Cut length1,173 mm at this size
Narrowest part0.9 mm at this size
Nodes252 curve and line segments

Measured from the file. PNG: 2,000 × 1,798 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.9 in (25 × 23 mm)0.23 mm298 mm110Too fine for most machines
2 × 1.79 in (51 × 45 mm)0.46 mm596 mm30Too fine for most machines
3 × 2.69 in (76 × 68 mm)0.69 mm894 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.58 in (102 × 91 mm)0.91 mm1,192 mm6Fine detail: vinyl and paper only, weed with care
6 × 5.37 in (152 × 136 mm)1.4 mm1,788 mm2Vinyl, card and thin sheet
8 × 7.16 in (203 × 182 mm)1.8 mm2,384 mm1Vinyl, card and thin sheet
12 × 10.74 in (305 × 273 mm)2.7 mm3,575 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pop up card SVG files

← Long pop up card with three steps All 10 pop up cards Pop up card template to print and cut by hand →