Free pelican SVG

Pelican head and bill SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pelican head and bill, as a solid black shape
Pelican head and bill. The preview is the SVG file itself.

The head, neck and bill of a pelican drawn large: a smooth round head, a bright eye, the long upper bill with its hooked tip and the pouch sagging below it. For plaques and badges.

What is in the file

Size100 × 67 mm (3.94 × 2.64 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut6: 1 outer edge and 5 cut-outs
Cut length604 mm at this size
Narrowest part1 mm at this size
Nodes137 curve and line segments

Measured from the file. PNG: 2,000 × 1,365 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.67 in (25 × 17 mm)0.25 mm153 mm140Too fine for most machines
2 × 1.34 in (51 × 34 mm)0.51 mm307 mm35Fine detail: vinyl and paper only, weed with care
3 × 2.01 in (76 × 51 mm)0.76 mm460 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.68 in (102 × 68 mm)1 mm614 mm8Vinyl, card and thin sheet
6 × 4.02 in (152 × 102 mm)1.5 mm920 mm2Vinyl, card and thin sheet
8 × 5.36 in (203 × 136 mm)2 mm1,227 mm2Vinyl, card and thin sheet
12 × 8.04 in (305 × 204 mm)3 mm1,841 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pelican SVG files

← Pelican with a fish All 12 pelicans Two pelicans on pilings →