Free pelican SVG

Pelican dock sign for a name SVG

Pelican dock sign for a name, as a solid black shape — Pelican dock sign for a name. The preview is the SVG file itself.

A pelican on a piling with an empty signboard hung beside it from two short chains. Add a family name, a boat name or a house number to the board so that it touches the frame, and weld.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	100 × 74 mm (3.94 × 2.91 in), scales to any size
Pieces	One piece: it holds together when cut
Outlines to cut	11: 1 outer edge and 10 cut-outs
Cut length	839 mm at this size
Narrowest part	1.6 mm at this size
Nodes	181 curve and line segments

Measured from the file. PNG: 2,000 × 1,500 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
1 × 0.74 in (25 × 19 mm)	0.41 mm	213 mm	120	Too fine for most machines
2 × 1.48 in (51 × 38 mm)	0.81 mm	426 mm	35	Fine detail: vinyl and paper only, weed with care
3 × 2.22 in (76 × 56 mm)	1.2 mm	639 mm	15	Vinyl, card and thin sheet
4 × 2.96 in (102 × 75 mm)	1.6 mm	852 mm	6	Vinyl, card and thin sheet
6 × 4.44 in (152 × 113 mm)	2.4 mm	1,279 mm	2	Vinyl, card and thin sheet
8 × 5.92 in (203 × 150 mm)	3.3 mm	1,705 mm	1	Any material, including 3 mm wood and acrylic
12 × 8.88 in (305 × 226 mm)	4.9 mm	2,557 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pelican SVG files

← Two pelicans on pilings All 12 pelicans Pelican harbour scene in a ring →