Free pelican SVG

Layered pelican on a piling SVG

Layered pelican on a piling, in layered colours — Layered pelican on a piling. The preview is the SVG file itself.

Four layers to stack: a brown piling with the whole bird behind it as a backing, a pale grey pelican, a slate wing with the eye, and an orange bill and pouch. This one faces right.

Download SVG PNG DXF

Free for personal and commercial use, no sign-up. What you can do with it.

What is in the file

Size	72 × 100 mm (2.84 × 3.94 in), scales to any size
Pieces	5 separate pieces
Outlines to cut	8: 5 outer edges and 3 cut-outs
Cut length	843 mm at this size
Narrowest part	2.4 mm at this size
Nodes	222 curve and line segments
Layers	4: piling, pelican, wing and eye and bill and pouch

Measured from the file. PNG: 1,463 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × height	Narrowest part	Cut length	Fit on a 12 in sheet	Rule of thumb
0.72 × 1 in (18 × 25 mm)	0.61 mm	214 mm	130	Fine detail: vinyl and paper only, weed with care
1.44 × 2 in (37 × 51 mm)	1.2 mm	428 mm	35	Vinyl, card and thin sheet
2.16 × 3 in (55 × 76 mm)	1.8 mm	642 mm	15	Vinyl, card and thin sheet
2.88 × 4 in (73 × 102 mm)	2.4 mm	856 mm	6	Vinyl, card and thin sheet
4.33 × 6 in (110 × 152 mm)	3.7 mm	1,285 mm	2	Any material, including 3 mm wood and acrylic
5.77 × 8 in (147 × 203 mm)	4.9 mm	1,713 mm	2	Any material, including 3 mm wood and acrylic
8.65 × 12 in (220 × 305 mm)	7.3 mm	2,569 mm	1	Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pelican SVG files

← Pelican outline All 12 pelicans Pelican standing →