Free pelican SVG

Pelican with a fish SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Pelican with a fish, as a solid black shape
Pelican with a fish. The preview is the SVG file itself.

The standing pelican with a fish held crosswise in the tip of its bill, tail hanging one side and head the other. A light-hearted one for fishing cabins, tackle boxes and seafood signs.

What is in the file

Size100 × 96 mm (3.94 × 3.78 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut8: 1 outer edge and 7 cut-outs
Cut length693 mm at this size
Narrowest part1.2 mm at this size
Nodes179 curve and line segments

Measured from the file. PNG: 2,000 × 1,921 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.96 in (25 × 24 mm)0.3 mm176 mm100Too fine for most machines
2 × 1.92 in (51 × 49 mm)0.61 mm352 mm25Fine detail: vinyl and paper only, weed with care
3 × 2.88 in (76 × 73 mm)0.91 mm528 mm9Fine detail: vinyl and paper only, weed with care
4 × 3.84 in (102 × 97 mm)1.2 mm704 mm6Vinyl, card and thin sheet
6 × 5.75 in (152 × 146 mm)1.8 mm1,056 mm2Vinyl, card and thin sheet
8 × 7.67 in (203 × 195 mm)2.4 mm1,408 mm1Vinyl, card and thin sheet
12 × 11.51 in (305 × 292 mm)3.7 mm2,112 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More pelican SVG files

← Pelican on the water All 12 pelicans Pelican head and bill →