Panda outline SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
The sitting panda drawn as lines of one weight, with the ears, eye patches, arms and legs left open to colour in. One connected piece for colouring pages and pen plotters.
What is in the file
| Size | 66 × 100 mm (2.61 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 9: 1 outer edge and 8 cut-outs |
| Cut length | 1,240 mm at this size |
| Narrowest part | 1.9 mm at this size |
| Nodes | 402 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 1,352 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.66 × 1 in (17 × 25 mm) | 0.48 mm | 315 mm | 140 | Too fine for most machines |
| 1.33 × 2 in (34 × 51 mm) | 0.97 mm | 630 mm | 35 | Fine detail: vinyl and paper only, weed with care |
| 1.99 × 3 in (51 × 76 mm) | 1.4 mm | 945 mm | 15 | Vinyl, card and thin sheet |
| 2.65 × 4 in (67 × 102 mm) | 1.9 mm | 1,260 mm | 8 | Vinyl, card and thin sheet |
| 3.98 × 6 in (101 × 152 mm) | 2.9 mm | 1,890 mm | 2 | Vinyl, card and thin sheet |
| 5.3 × 8 in (135 × 203 mm) | 3.9 mm | 2,520 mm | 2 | Any material, including 3 mm wood and acrylic |
| 7.96 × 12 in (202 × 305 mm) | 5.8 mm | 3,780 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.