Free panda SVG

Layered panda with bamboo in three colours SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Layered panda with bamboo in three colours, in layered colours
Layered panda with bamboo in three colours. The preview is the SVG file itself.

Three layers: the whole panda in white, its black markings to glue on top, and a green bamboo cane. Cut each from its own sheet of card and stack them.

What is in the file

Size83 × 100 mm (3.28 × 3.94 in), scales to any size
Pieces11 separate pieces
Outlines to cut21: 11 outer edges and 10 cut-outs
Cut length1,617 mm at this size
Narrowest part4.1 mm at this size
Nodes406 curve and line segments
Layers3: white, black and bamboo

Measured from the file. PNG: 1,677 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.83 × 1 in (21 × 25 mm)1 mm411 mm110Vinyl, card and thin sheet
1.66 × 2 in (42 × 51 mm)2.1 mm821 mm30Vinyl, card and thin sheet
2.5 × 3 in (63 × 76 mm)3.1 mm1,232 mm12Any material, including 3 mm wood and acrylic
3.33 × 4 in (85 × 102 mm)4.2 mm1,643 mm6Any material, including 3 mm wood and acrylic
4.99 × 6 in (127 × 152 mm)6.2 mm2,464 mm2Any material, including 3 mm wood and acrylic
6.66 × 8 in (169 × 203 mm)8.3 mm3,286 mm1Any material, including 3 mm wood and acrylic
9.98 × 12 in (254 × 305 mm)12 mm4,929 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More panda SVG files

← Red panda All 13 pandas Sitting panda →