Free panda SVG

Panda family SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Panda family, as a solid black shape
Panda family. The preview is the SVG file itself.

Two grown pandas sitting together with a cub on all fours in front of them. The three overlap, so the family is a single piece.

What is in the file

Size100 × 85 mm (3.94 × 3.36 in), scales to any size
PiecesOne piece: it holds together when cut
Outlines to cut24: 1 outer edge and 23 cut-outs
Cut length1,588 mm at this size
Narrowest part1 mm at this size
Nodes633 curve and line segments

Measured from the file. PNG: 2,000 × 1,719 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.85 in (25 × 22 mm)0.25 mm403 mm110Too fine for most machines
2 × 1.71 in (51 × 43 mm)0.51 mm807 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.56 in (76 × 65 mm)0.76 mm1,210 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.42 in (102 × 87 mm)1 mm1,613 mm6Vinyl, card and thin sheet
6 × 5.12 in (152 × 130 mm)1.5 mm2,420 mm2Vinyl, card and thin sheet
8 × 6.83 in (203 × 174 mm)2 mm3,227 mm1Vinyl, card and thin sheet
12 × 10.25 in (305 × 260 mm)3 mm4,840 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More panda SVG files

← Panda couple with a heart All 13 pandas Panda hugging a heart →