Panda face SVG
A round panda face: two black ears, two tilted eye patches with bright eyes, a nose and a smile, held together by the outline and a ring round the muzzle.
Free for personal and commercial use, no sign-up. What you can do with it.
What is in the file
| Size | 100 × 88 mm (3.94 × 3.47 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 5: 1 outer edge and 4 cut-outs |
| Cut length | 963 mm at this size |
| Narrowest part | 2.9 mm at this size |
| Nodes | 182 curve and line segments |
| Symmetry | Mirror |
Measured from the file. PNG: 2,000 × 1,771 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.88 in (25 × 22 mm) | 0.74 mm | 245 mm | 110 | Fine detail: vinyl and paper only, weed with care |
| 2 × 1.76 in (51 × 45 mm) | 1.5 mm | 489 mm | 30 | Vinyl, card and thin sheet |
| 3 × 2.64 in (76 × 67 mm) | 2.2 mm | 734 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.52 in (102 × 90 mm) | 2.9 mm | 978 mm | 6 | Vinyl, card and thin sheet |
| 6 × 5.29 in (152 × 134 mm) | 4.4 mm | 1,468 mm | 2 | Any material, including 3 mm wood and acrylic |
| 8 × 7.05 in (203 × 179 mm) | 5.9 mm | 1,957 mm | 1 | Any material, including 3 mm wood and acrylic |
| 12 × 10.57 in (305 × 269 mm) | 8.8 mm | 2,935 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
Panda with bamboo 
Baby panda 
Sleeping panda on a branch 
Panda couple with a heart 
Panda family 
Panda hugging a heart 
Peeking panda 
Panda outline 