Panda with bamboo SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A sitting panda holding a bamboo cane in one paw, with a spray of leaves at the top. One piece: the cane is welded to the paw that holds it.
This shape is also a part in the shadow box scene maker, where you can stand it in a layered scene and download the sheets.
What is in the file
| Size | 83 × 100 mm (3.28 × 3.94 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 15: 1 outer edge and 14 cut-outs |
| Cut length | 1,188 mm at this size |
| Narrowest part | 1 mm at this size |
| Nodes | 433 curve and line segments |
| Also found as | Cute panda SVG |
Measured from the file. PNG: 1,677 × 2,000 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 0.83 × 1 in (21 × 25 mm) | 0.25 mm | 302 mm | 110 | Too fine for most machines |
| 1.66 × 2 in (42 × 51 mm) | 0.51 mm | 604 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 2.5 × 3 in (63 × 76 mm) | 0.76 mm | 905 mm | 12 | Fine detail: vinyl and paper only, weed with care |
| 3.33 × 4 in (85 × 102 mm) | 1 mm | 1,207 mm | 6 | Vinyl, card and thin sheet |
| 4.99 × 6 in (127 × 152 mm) | 1.5 mm | 1,811 mm | 2 | Vinyl, card and thin sheet |
| 6.66 × 8 in (169 × 203 mm) | 2 mm | 2,414 mm | 1 | Vinyl, card and thin sheet |
| 9.98 × 12 in (254 × 305 mm) | 3 mm | 3,621 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.