Free Not Step Not Half Just Family SVG

Not Step Not Half with hearts SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Not Step Not Half with hearts, as a solid black shape
Not Step Not Half with hearts. The preview is the SVG file itself.

“Not Step Not Half Just Family” in Lobster with a row of three hearts above the words and three below, the middle one larger. The hearts are loose pieces, spaced to the width of the lettering.

What is in the file

Size89 × 100 mm (3.5 × 3.94 in), scales to any size
Pieces19 separate pieces
Outlines to cut28: 19 outer edges and 9 cut-outs
Cut length1,509 mm at this size
Narrowest part0.6 mm at this size
Nodes506 curve and line segments

Measured from the file. PNG: 1,785 × 2,000 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
0.89 × 1 in (23 × 25 mm)0.15 mm383 mm110Too fine for most machines
1.78 × 2 in (45 × 51 mm)0.3 mm767 mm30Too fine for most machines
2.66 × 3 in (68 × 76 mm)0.46 mm1,150 mm12Too fine for most machines
3.55 × 4 in (90 × 102 mm)0.61 mm1,533 mm6Fine detail: vinyl and paper only, weed with care
5.33 × 6 in (135 × 152 mm)0.91 mm2,300 mm2Fine detail: vinyl and paper only, weed with care
7.1 × 8 in (180 × 203 mm)1.2 mm3,066 mm1Vinyl, card and thin sheet
10.66 × 12 in (271 × 305 mm)1.8 mm4,599 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Not Step Not Half Just Family SVG files

← Not Step Not Half in script and capitals All 13 Not Step Not Half Just Family designs Not Step Not Half outline lettering →