Free Not Step Not Half Just Family SVG

Not Step Not Half in Pacifico SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Not Step Not Half in Pacifico, as a solid black shape
Not Step Not Half in Pacifico. The preview is the SVG file itself.

“Not Step Not Half Just Family” set in Pacifico, a bold brush script, on 3 centred lines. The letters of each word join, as handwriting does, so a word comes off the mat in one piece apart from any dots.

What is in the file

Size100 × 89 mm (3.94 × 3.51 in), scales to any size
Pieces10 separate pieces
Outlines to cut27: 10 outer edges and 17 cut-outs
Cut length1,641 mm at this size
Narrowest part1.2 mm at this size
Nodes626 curve and line segments

Measured from the file. PNG: 2,000 × 1,790 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.89 in (25 × 23 mm)0.3 mm417 mm110Too fine for most machines
2 × 1.78 in (51 × 45 mm)0.61 mm834 mm30Fine detail: vinyl and paper only, weed with care
3 × 2.67 in (76 × 68 mm)0.91 mm1,250 mm12Fine detail: vinyl and paper only, weed with care
4 × 3.56 in (102 × 91 mm)1.2 mm1,667 mm6Vinyl, card and thin sheet
6 × 5.35 in (152 × 136 mm)1.8 mm2,501 mm2Vinyl, card and thin sheet
8 × 7.13 in (203 × 181 mm)2.4 mm3,335 mm1Vinyl, card and thin sheet
12 × 10.69 in (305 × 272 mm)3.7 mm5,002 mm1Any material, including 3 mm wood and acrylic

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Not Step Not Half Just Family SVG files

← Not Step Not Half with a heart All 13 Not Step Not Half Just Family designs Not Step Not Half in Lobster →