Free Not Step Not Half Just Family SVG

Not Step Not Half in Kaushan Script SVG

Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.

Free for personal and commercial use, no sign-up. What you can do with it.

Not Step Not Half in Kaushan Script, as a solid black shape
Not Step Not Half in Kaushan Script. The preview is the SVG file itself.

“Not Step Not Half Just Family” set in Kaushan Script, a lively brush script, on 3 centred lines. It leans forward with the uneven edge of a loaded brush, which suits informal signs and shirts.

What is in the file

Size100 × 72 mm (3.94 × 2.83 in), scales to any size
Pieces24 separate pieces
Outlines to cut28: 24 outer edges and 4 cut-outs
Cut length1,487 mm at this size
Narrowest part0.7 mm at this size
Nodes717 curve and line segments

Measured from the file. PNG: 2,000 × 1,458 pixels, transparent. About the three file types.

Will it cut at your size?

Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.

Size, width × heightNarrowest partCut lengthFit on a 12 in sheetRule of thumb
1 × 0.72 in (25 × 18 mm)0.18 mm378 mm130Too fine for most machines
2 × 1.44 in (51 × 36 mm)0.36 mm755 mm35Too fine for most machines
3 × 2.15 in (76 × 55 mm)0.53 mm1,133 mm15Fine detail: vinyl and paper only, weed with care
4 × 2.87 in (102 × 73 mm)0.71 mm1,511 mm6Fine detail: vinyl and paper only, weed with care
6 × 4.31 in (152 × 109 mm)1.1 mm2,266 mm2Vinyl, card and thin sheet
8 × 5.74 in (203 × 146 mm)1.4 mm3,022 mm2Vinyl, card and thin sheet
12 × 8.62 in (305 × 219 mm)2.1 mm4,532 mm1Vinyl, card and thin sheet

The narrowest part is the thinnest neck or wall beside a cut-out; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.

More Not Step Not Half Just Family SVG files

← Not Step Not Half in Lobster All 13 Not Step Not Half Just Family designs Not Step Not Half in Lilita One →