Not Step Not Half stencil plate SVG
Which one? SVG for Cricut and lasers, DXF for the free Silhouette Studio, PNG to print.
Free for personal and commercial use, no sign-up. What you can do with it.
A rounded plate with “NOT STEP NOT HALF JUST FAMILY” cut through it in block capitals, every closed letter bridged so nothing drops out. One piece: tape it down and paint or spray through it.
What is in the file
| Size | 100 × 78 mm (3.94 × 3.06 in), scales to any size |
|---|---|
| Pieces | One piece: it holds together when cut |
| Outlines to cut | 25: 1 outer edge and 24 cut-outs |
| Cut length | 1,674 mm at this size |
| Narrowest part | 1.4 mm at this size |
| Nodes | 429 curve and line segments |
Measured from the file. PNG: 2,000 × 1,573 pixels, transparent. About the three file types.
Will it cut at your size?
Scaling a design scales its thinnest part too. Here is this one at seven sizes, from 1 to 12 inches on its longer side, with how many copies fit a 12 × 12 inch sheet or mat.
| Size, width × height | Narrowest part | Cut length | Fit on a 12 in sheet | Rule of thumb |
|---|---|---|---|---|
| 1 × 0.78 in (25 × 20 mm) | 0.36 mm | 425 mm | 120 | Too fine for most machines |
| 2 × 1.56 in (51 × 40 mm) | 0.71 mm | 850 mm | 30 | Fine detail: vinyl and paper only, weed with care |
| 3 × 2.33 in (76 × 59 mm) | 1.1 mm | 1,276 mm | 12 | Vinyl, card and thin sheet |
| 4 × 3.11 in (102 × 79 mm) | 1.4 mm | 1,701 mm | 6 | Vinyl, card and thin sheet |
| 6 × 4.67 in (152 × 119 mm) | 2.1 mm | 2,551 mm | 2 | Vinyl, card and thin sheet |
| 8 × 6.22 in (203 × 158 mm) | 2.8 mm | 3,402 mm | 1 | Vinyl, card and thin sheet |
| 12 × 9.34 in (305 × 237 mm) | 4.3 mm | 5,102 mm | 1 | Any material, including 3 mm wood and acrylic |
The narrowest part is the thinnest neck that holds the design together; sharp tips are not counted. For wood and acrylic, keep it at least as wide as the sheet is thick. How to open the file in Cricut, Silhouette and laser software.
More Not Step Not Half Just Family SVG files
-
Not Step Not Half with a drop shadow Layered · 15 pieces -
Not Step Not Half in Pacifico Solid · 10 pieces -
Not Step Not Half in Lobster Solid · 13 pieces -
Not Step Not Half in Kaushan Script Solid · 24 pieces -
Not Step Not Half in Lilita One Solid · 25 pieces -
Not Step Not Half in Alfa Slab One Solid · 25 pieces -
Not Step Not Half in Amatic SC Solid · 24 pieces -
Not Step Not Half in block capitals Solid · 24 pieces
← Not Step Not Half outline lettering All 12 Not Step Not Half Just Family designs Not Step Not Half with a drop shadow →